Brand: Bosch Thermotechnology
Color: White
Features:
- Product 1: CONVENIENT HOT WATER HEATER: 2.5 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 13.75 W x 13.75 H x 10.75 D Inches
- Product 1: LONG LASTING QUALITY: This electric water heater is easy to maintain and has premium glass-lined material for a long service life. (Amps 12A, Volts (VAC) 120)
- Product 1: INDEPENDENT INSTALLATION: 36-37″ cord plugs into a 120 volt outlet for independent installation or in-line with a large hot water source
- Product 1: FAST RECOVERY RATE: Eliminates long waits for hot water at your sink, get on demand hot water at your every need (supplies up to 2 sinks at a time)
- Product 2: Model number: BV1BUB112
- Product 2: Country of Origin: China
- Product 2: Brand name: HEPVO
Package Dimensions: 0x0x0
Details: Bosch Electric Mini-Tank Water Heater Tronic 3000 T 2.5-Gallon (ES2.5) – Eliminate Time for Hot Water – Shelf, Wall or Floor Mounted
Bosch Electric Mini-Tank Water Heater Tronic 3000 T 2. 5-Gallon (ES2. 5) – Eliminate Time for Hot Water – Shelf, Wall or Floor Mounted.
Troubleshoot: (1) Water does not get hot- * Make sure the power supply is on and working * If the indicator light works properly but temperature does not get hot at the tap, test for a plumbing crossover; shut off cold supply to heater and open hot water tap. There should be no water flowing. Any continued flow indicates a crossover which will effect the temperature and will need to be corrected * Call a qualified service technician to test the resistance of the heating element (8-10 ohms). Heating element should be replaced if readings are outside these values (2) Leaking- * Check water fittings and T & P fitting on top of tank * Remove front cover and inspect heating element gasket * If tank is leaking call Bosch Water Heating for warranty claim if still within warranty period * Check anode rod. Other troubleshoot solutions are available on the installation manual Pg-11.
Wavin BV1B/UB HepvO Sanitary Waste Valve – 1-1/2″
HepvO is a self-sealing valve designed to close the waste connection below a sanitary fixture to prevent the escape of foul sewer air into the dwelling. HepvO unlike conventional waste traps, does not rely on trapped water to create a seal. Instead, HepvO uses a self-sealing membrane, which performs the same function as a water seal trap but without the risk of evaporation, siphonage, or cracking under freezing conditions. The HepvO valve means enhanced plumbing design and system efficiency, without compromising performance or risking the escape of foul air into the living space from the drain or sewer. Typical Applications: Lavatories, bath tubs, sinks, bidets, washing machines, garbage disposals, overflows, dishwashers or showers.
Reviews
There are no reviews yet.